GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Drive Belt Tensioner Replacement - Generator

Removal Procedure
  1. Remove the air conditioning, power steering, and water pump drive belt. Refer to Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement.
  2. Remove the generator drive belt. Refer to Generator Drive Belt Replacement.

    3. Object Number: 887841 Size: SH
  3. Loosen the generator drive belt tensioner bolt.
  4. Remove the drive belt tensioner and bolt from the engine.

Installation Procedure

    Object Number: 887841 Size: SH
  1. Position the generator drive belt tensioner and bolt to the engine as an assembly.
  2. Ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the drive belt tensioner bolt.

    4. Tighten
    Tighten the drive belt tensioner bolt to 50 N·m (37 lb ft).

  4. Install the generator drive belt. Refer to Generator Drive Belt Replacement.
  5. Install the air conditioning, power steering, and water pump drive belt. Refer to Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement.