For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the lower air deflector. Refer to Front Air Deflector Replacement in Bumpers.
- Loosen the bolt (1) that secures the horn assembly (2) to the body 4 full turns.
- Grasp the horn assembly (2) on both sides and rock it back and forth in order to pull it forward on the stud.
- Slide the horn assembly (2) rearward in order to locate the stud in the large portion of the keyhole slot (4).
- Disconnect the horn electrical connector (3) from the horn assembly (2).
- Pull the horn assembly (2) outward in order to remove it from the vehicle.
Installation Procedure
- Connect the horn electrical connector (3) to the horn assembly (2).
- Install the stud of the horn assembly (2) into the large portion of the keyhole slot (4).
- Slide the horn assembly (2) forward in the keyhole slot (4).
- Tighten the bolt (1) in order to secure the horn assembly (2) to the body side rail.
- Install the lower air deflector. Refer to Front Air Deflector Replacement in Bumpers.
- Lower the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 9 N·m (80 lb in).
