GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 SRX 🢒 Body 🢒 Interior Trim 🢒 Body Side Rear Upper Garnish Molding Replacement

Removal Procedure
  1. Remove the seat belt retractor guide bolt (1).

    2. Object Number: 1070118 Size: SH
  2. Remove the seat belt retractor anchor bolt (3).

    3. Object Number: 1203631 Size: SH
  3. Remove the garnish molding (1).
  4. Slide the seat belt through the garnish molding.

Installation Procedure
  1. Insert the seat belt through the garnish molding.
  2. Insert the seat belt guide into the garnish molding.

    3. Object Number: 1203631 Size: SH
  3. Align the retainers on the garnish molding (1) with the holes in the body pillar.
  4. Push the panel inward in order to secure the retainers.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1070118 Size: SH
  5. Install the seat belt retractor anchor bolt (3). Ensure that the belt is not twisted.

    6. Tighten
    Tighten the bolt to 45 N·m (33 lb ft)

  6. Install the seat belt retractor guide bolt (1). Ensure that the belt is not twisted.

    7. Tighten
    Tighten the bolt to 70 N·m (52 lb ft)