Removal Procedure
- Remove the front overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Remove the screws securing the sunroof switch (1)
to the overhead console.
- Disconnect the electrical connector.
- Remove the switch.
Installation Procedure
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws securing the sunroof switch (1) to the overhead console.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the front overhead console. Refer to
Roof Console Replacement
in Interior Trim.