Removal Procedure
- Move the front sunroof window to the full open position.
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Remove the screws from the front track extension.
- Loosen the 3 forwardmost screws from the front sunroof track.
- Loosen the remaining track screws including the screw retaining the rear
extension block to the sunroof cable drive tubes.
- Flex the track downward in order to across
the front extension track slot (1).
- With a flat-bladed tool in the track slot (1), release the tab
securing the front extension to the track (3)
- Remove the front track extension (2).
Installation Procedure
- Position the front track extension (4)
to the track (1).
Important: Ensure that the release tab (2) is secure to the track (1).
- Ensure that the front track is parallel to the opposite side track prior
to securing the screws.
Notice: Refer to Fastener Notice in the Preface section.
- Loosely install the 3 forwardmost screws to the front sunroof track.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Install the screws to the front track extension.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Close the front sunroof window.