For 1990-2009 cars only
Removal Procedure
- Pull out on the center I/P vent assembly in order to release the fasteners securing the vent to the I/P.
- Disconnect the hazard switch electrical connector.
- Remove the vent from the I/P.
Installation Procedure
- Connect the hazard switch connector.
- Position hazard switch wire harness (1) in the harness retainers.
- Push the wire service loop forward between the duct as the vent is positioned on the I/P.
- Overlap the vent housing over the duct.
- Position the vent into the I/P.
- Push the vent in to the I/P in order to seat the retainers.
Important: Ensure that the wire harness is not interfering with the moving parts of the vent.
