GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Seat Control Module Replacement - Rear Seat Number 2

Removal Procedure
  1. Remove the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement .

    2. Object Number: 1261005 Size: SH
  2. Disconnect the electrical connector (1) from the seat control module.
  3. Remove the nuts from the control module (2).
  4. Remove the module.

Installation Procedure
  1. Install the seat control module on to seat adjuster.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1261005 Size: SH
  2. Install the seat control module nuts (2).

    3. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  3. Connect the electrical connector (2) to the control module.
  4. Install the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement .
  5. Calibrate the seat. Refer to Power Folding Seat Calibration .