GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Seat Number 2 Back Pivot Actuator Motor Replacement - Back Cushion

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Number 2 Folding Seat Replacement .
  2. Remove the rear seat back panel. Refer to Rear Seat Number 2 Back Cushion Panel Replacement .
  3. Remove the head restraints. Refer to Rear Seat Number 2 Head Restraint Replacement .
  4. Remove the rear seat back cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .

    5. Object Number: 1261040 Size: SH
  5. Remove the inner recliner arm covers (1) from the seat back.

    6. Object Number: 1261073 Size: SH
  6. Remove the outer recliner arm cover screws (1).
  7. Remove the outer recliner arm pivot covers.
  8. Disconnect the electrical connector form the rotation motor.

    9. Object Number: 1261040 Size: SH
  9. Remove the rotation motor bolts (2).
  10. Slide the rotation motor off of the driveshaft.

Installation Procedure
  1. Slide the rotation motor on to the driveshaft.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1261040 Size: SH
  2. Install the rotation motor mounting bolts (2).

    3. Tighten
    Tighten the bolts to 7 N·m (62 lb in).

  3. Connect the electrical connector to the rotation motor.
  4. Install the outer recliner arm pivot covers.

    5. Object Number: 1261073 Size: SH
  5. Install the outer recliner arm cover screws (1).

    6. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 1261040 Size: SH
  6. Install the inner recliner arm covers (1) to the seat back.
  7. Install the rear seat back cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
  8. Install the head restraints. Refer to Rear Seat Number 2 Head Restraint Replacement
  9. Install the rear seat back panel. Refer to Rear Seat Number 2 Back Cushion Panel Replacement .
  10. Install the seat in the vehicle. Refer to Rear Number 2 Folding Seat Replacement .
  11. Calibrate the seat. Refer to Power Folding Seat Calibration .