Removal Procedure
- Turn the ignition OFF.
- Remove the mass air flow (MAF) electrical connector.
- Remove the air cleaner intake duct. Refer to
Air Cleaner Inlet Duct Replacement
.
- Remove the MAF sensor fasteners.
- Remove the MAF sensor and the MAF sensor seal.
- Discard the MAF sensor seal.
Installation Procedure
- Install the new MAF sensor seal and the MAF sensor.
Notice: Refer to Fastener Notice in the Preface section.
- Install the MAF sensor screws.
Tighten
Tighten the MAF sensor screws to 4 N·m (35 lb in).
- Install the air cleaner intake duct. Refer to
Air Cleaner Inlet Duct Replacement
.
- Install the MAF electrical connector.