Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Using a 90 degree pick, disengage the lower filter cover clips.
- Insert a flat-bladed tool between the filter cover and canister, and push up to disengage the upper clips.
- Remove and discard the evaporative emission (EVAP) canister filter cover.
- Remove and discard the EVAP canister filter.
- Clean the inside of the EVAP canister filter housing with a clean shop towel.
Installation Procedure
- Insert a NEW EVAP canister filter into the EVAP canister.
Important: Ensure the NEW seal is properly seated into the NEW cover.
- Install a NEW EVAP canister filter cover seal to a EVAP NEW canister cover.
- Snap the EVAP canister filter cover onto the EVAP canister.
- Lower the vehicle.