Engine Coolant Fan Shroud Replacement LH2

1. Remove the fan. Refer to Engine Coolant Fan Replacement.
2. Lower the vehicle.
3. Disconnect the condenser tube from the fan shroud retainer clip.
4. Remove the cooling fan shroud retaining bolts.
5. Remove the cooling fan shroud.

1. Install the cooling fan shroud.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the cooling fan shroud retaining bolts.

Tighten
Tighten the bolts to 6.5 N·m (58 lb in).

3. Connect the condenser tube to the fan shroud retainer clip.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Install the fan. Refer to Engine Coolant Fan Replacement.