GM Service Manual Online
For 1990-2009 cars only

Coolant Heater Replacement LY7, KO5

Removal Procedure

  1. Turn the ignition OFF.
  2. Raise and support the vehicle.
  3. Disconnect the coolant heater cord from the coolant heater.

  4. Object Number: 1312571  Size: SH
  5. Remove the coolant heater.

Installation Procedure


    Object Number: 1312571  Size: SH
  1. Install the coolant heater.
  2. Connect the coolant heater cord to the coolant heater.
  3. Lower the vehicle.

Coolant Heater Replacement LH2, KO5

Removal Procedure


    Object Number: 887762  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the coolant heater power supply cord from the coolant heater.
  3. Complete the following in order to remove the coolant heater from the engine block:
  4. 3.1. Pry outward on the retaining clip.
    3.2. Pull the coolant heater from the engine block.

Installation Procedure


    Object Number: 887762  Size: SH
  1. Install the coolant heater into the engine block until the retaining clip is fully engaged.
  2. Connect the coolant heater power cord to the coolant heater.
  3. Lower the vehicle.

Coolant Heater Replacement LH2, KA3

Removal Procedure


    Object Number: 887764  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the coolant heater power supply cord from the coolant heater.
  3. Complete the following in order to remove the coolant heater from the engine block:
  4. 3.1. Pry outward on the retaining clip.
    3.2. Pull the coolant heater from the engine block.

Installation Procedure


    Object Number: 887764  Size: SH
  1. Install the coolant heater into the engine block until the retaining clip is fully engaged.
  2. Connect the coolant heater power cord to the coolant heater.
  3. Lower the vehicle.