Removal Procedure
- Raise and support vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the front propeller shaft constant velocity (CV) joint shield bolts (1).
- Remove the front propeller shaft CV joint heat shield (2).
Installation Procedure
- Install the front propeller shaft CV joint heat shield (2) to the vehicle.
- Inspect the front propeller shaft CV joint heat shield bolts (1). Replace if damaged or worn.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front propeller shaft CV joint heat shield bolts (1).
Tighten
Tighten the front propeller shaft CV joint heat shield bolts to 9 N·m (80 lb in).
- Lower the vehicle.