Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
- Remove the stabilizer shaft link upper retaining nut.
- Remove the stabilizer shaft link lower retaining nut.
- Remove the stabilizer shaft link from the vehicle.
Installation Procedure
- Install the stabilizer shaft link to the vehicle.
Important: Do not tighten the nuts at this time.
Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
- Install the stabilizer shaft link lower retaining nut.
Notice: Refer to Fastener Notice in the Preface section.
- Install the stabilizer shaft link upper retaining nut.
Tighten
Tighten the nuts to 115 N·m (95 lb ft).
- Lower the vehicle.