Exhaust Manifold Installation - Right Side RWD
- Install the engine mount bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount bracket bolts.
Tighten
Tighten the engine mount bracket bolts to 60 N·m (44 lb ft).
- Install the engine mount.
- Install the engine mount nut.
Tighten
Tighten the engine mount nut to 80 N·m (59 lb ft).
- Position a NEW exhaust manifold gasket onto the right exhaust manifold.
- Install the exhaust manifold bolts into the right exhaust manifold.
- Place the right exhaust manifold, exhaust manifold gasket and bolts as an assembly in position on the right cylinder head.
- Install the exhaust manifold bolts into the right cylinder head.
Tighten
Tighten the exhaust manifold bolts to 25 N·m (18 lb ft).
- Place the right exhaust manifold heat shield in position.
- Install the exhaust manifold heat shield bolts.
Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m (89 lb in).
Exhaust Manifold Installation - Right Side AWD
- Install the engine mount bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount bracket bolts.
Tighten
• | Tighten the M10 engine mount bracket bolts (1) to 60 N·m (44 lb ft). |
• | Tighten the M8 engine mount bracket bolts (2) to 38 N·m (28 lb ft). |
- Install the engine mount.
- Install the engine mount nut.
Tighten
Tighten the engine mount nut to 80 N·m (59 lb ft).
- Position a NEW exhaust manifold gasket onto the right exhaust manifold.
- Install the exhaust manifold bolts into the right exhaust manifold.
- Place the right exhaust manifold, exhaust manifold gasket and bolts as an assembly in position on the right cylinder head.
- Install the exhaust manifold bolts into the right cylinder head.
Tighten
Tighten the exhaust manifold bolts to 25 N·m (18 lb ft).
- Place the right exhaust manifold heat shield in position.
- Install the exhaust manifold heat shield bolts.
Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m (89 lb in).