Tools Required
- Install the
EN 46106
through the starter mounting hole.
- Remove the crankshaft balancer bolt.
- Install the
J 38416-2
in the nose of the crankshaft.
- Install the
J 24420-C
in order to remove the crankshaft balancer.
- Pull the crankshaft balancer off by tightening the center bolt on the
J 24420-C
until the crankshaft balancer pulls off of the crankshaft end.
- Remove the
J 24420-C
from the crankshaft balancer.
- Remove the
EN 46106
.