GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Fuel Injector Sight Shield Replacement

Removal Procedure
  1. Remove the cross car brace. Refer to Cross Vehicle Brace Replacement .

    2. Object Number: 1201042 Size: SH
  2. Disengage the cover/shield from the ball studs by pulling up firmly on the right rear and left front of the engine cover.
  3. Remove the engine cover/sight shield.

Installation Procedure

    Object Number: 1201042 Size: SH
  1. Position the engine cover/sight shield over the intake manifold so the grommets are aligned with the ball studs.
  2. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
  3. Install the cross car brace. Refer to Cross Vehicle Brace Replacement .