Preliminary Procedures

1. Install the engine support fixture to support the engine. Refer to Engine Support Fixture.
2. Discharge the A/C system. Refer to Refrigerant Recovery and Recharging.
3. Remove the tower brace. Refer to Cross Vehicle Brace Replacement.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Remove the suction hose from the A/C compressor. Refer to Suction Hose Replacement.
6. Position the hose aside to gain access to the engine mount top nut.
7. Remove the lower section of the steering intermediate shaft. Refer to Lower Intermediate Steering Shaft Replacement.

1

Engine Mount Bracket Fastener (Qty: 2)

Notice: Refer to Component Fastener Tightening Notice in the Preface section.

Tighten
80 N·m (59 lb ft)

2

Engine Mount Bracket

Procedure

1. Disconnect the electrical connector.
2. Transfer components as necessary.