GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Power Mirror Replacement

Removal Procedure

    Object Number: 758769 Size: SH
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement.
  2. Disconnect the power mirror wire harness electrical connector (3).
  3. Remove the mirror fasteners (4, 5, 6).
  4. Remove the mirror (1) from the door.
  5. Pull the wiring harness through the hole in the mirror patch.

Installation Procedure

    Object Number: 758769 Size: SH
  1. Route the mirror wiring harness through the hole in the mirror patch.
  2. Seat the grommet (2) into the hole in the door frame.
  3. Install the mirror (1) into the door frame.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the mirror fasteners in the following sequence:

    5. Tighten

    1. Tighten the top mirror fastener (4) to 9 N·m (80 lb in).
    2. Tighten the forward mirror fastener (5) to 9 N·m (80 lb in).
    3. Tighten the rear, lower mirror fastener (6) to 9 N·m (80 lb in).
  5. Connect the power mirror electrical connector (3).
  6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .