Table 1: | Memory Seat Module Scan Tool Data Parameters |
Table 2: | Memory Seat Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
---|---|---|---|
Operating Conditions: Ignition ON | |||
Accelerator Pedal Position Sensor | -- | Varies | This displays Volts. This is the current accelerator pedal position voltage. |
Brake Pedal Position Sensor | -- | Varies | This displays Volts. This is the current brake pedal position voltage. |
Driver Seat Front Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat front vertical sensor. |
Driver Seat Horizontal Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat horizontal sensor. |
Driver Seat HVC Level | -- | High | The scan tool displays High, Medium or Low. This is the current level of the driver heated seat or the heated cooled seat. |
Driver Seat HVC Mode | -- | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the driver heated seat or the heated cooled seat. |
Driver Seat Rear Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat rear vertical sensor. |
Driver Seat Recline Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the driver seat recline sensor. |
Front Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
Front Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
Front Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
Front Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
Horizontal Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
Horizontal Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
Horizontal Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
Horizontal Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
Lumbar Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar downward switch. |
Lumbar Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar forward switch. |
Lumbar Horizontal Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar horizontal sensor. |
Lumbar Inflation Value | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar inflation. |
Lumbar Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
Lumbar Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor downward. |
Lumbar Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor forward. |
Lumbar Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor rearward. |
Lumbar Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor upward. |
Lumbar Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar rearward switch. |
Lumbar Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar upward switch. |
Lumbar Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
Lumbar Vertical Sensor | -- | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
Massage Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the massage switch. |
Lumbar Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
Memory 1 Adj. Pedals Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the position of the adjustable pedals. |
Memory 2 Adj. Pedals Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the position of the adjustable pedals. |
Passenger Seat HVC Mode | -- | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the passenger heated seat or the heated cooled seat. |
Pedal Aft Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the pedal aft switch. |
Pedal Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the current state of the adjustable pedal assembly. |
Pedal Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the pedal forward switch. |
Pedal Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the current state of the adjustable pedal assembly. |
Pedals Forward Softstop Pos. | -- | Varies | This displays Volts. This is the current forward softstop voltage. |
Pedals Rearward Softstop Pos. | -- | Varies | This displays Volts. This is the current rearward softstop voltage. |
Pedals Softstop Learn Status | -- | Learned | The scan tool displays Learned, Learning, Failed or Unlearned. This is the current adjustable pedal assembly softstop learn status. |
Rear Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
Rear Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
Rear Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
Rear Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
Recline Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
Recline Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
Recline Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
Recline Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
Seat Front Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
Seat Horizontal Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
Seat Rear Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
Seat Recline Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
Scan Tool Output Control | Description |
---|---|
Clear Pedals Softstops | This output control is used to clear the adjustable pedal assembly softstops stored in memory. |
Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
Learn Pedals Softstops | This output control is used to program the adjustable pedal assembly softstops. |
Lumbar Forward/Rearward | This output control is used to command the driver seat lumbar forward and rearward. |
Lumbar Up/Down | This output control is used to command the driver seat lumbar Up and Down. |
Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
Seat Forward/Backward | This output control is used to command the driver seat forward and backward. |