GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure

    Object Number: 791861 Size: SH
  1. Pull down the overhead console to release the retainers securing it to the headliner.
  2. Lower the overhead console.
  3. Disconnect the microphone electrical connector.

    4. Object Number: 791859 Size: SH
  4. Remove the microphone retaining screws.
  5. Remove the microphone (1).

Installation Procedure

    Object Number: 791859 Size: SH
  1. Install the microphone (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the microphone retaining screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in)


    Object Number: 791861 Size: SH
  3. Connect the microphone electrical connector.
  4. Install the console retainers to the headliner bracket.
  5. Push up on the console to secure it to the headliner.