GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Auxiliary Blower Motor Replacement

Removal Procedure

    Object Number: 1342278 Size: SH
  1. Remove the left body side trim access panel.

    2. Object Number: 1342285 Size: SH
  2. Disconnect the blower motor electrical connector.
  3. Remove the blower motor screws from the HVAC module.
  4. Remove the blower motor from the HVAC module.

Installation Procedure

    Object Number: 1342285 Size: SH
  1. Install the blower motor to the HVAC module.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the blower motor screws.

    3. Tighten
    Tighten the screws to 1 N·m (9 lb in).

  3. Connect the blower motor electrical connector.

    4. Object Number: 1342278 Size: SH
  4. Install the left body side trim access panel.