Parking Brake Indicator Switch Replacement LHD

1. Remove the left sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
2. Disconnect the electrical connector from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch retaining bolt.
4. Remove the park brake warning lamp switch.

1. Install the park brake warning lamp switch to the park brake lever assembly. Align the locator pin to the locator hole.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the park brake switch retaining bolt.

Tighten
Tighten the bolt to 2 N·m (18 lb in).

3. Connect the park brake warning lamp electrical connector to the park brake warning lamp switch.
4. Install the left sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.

Parking Brake Indicator Switch Replacement RHD

1. Remove the right sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.
2. Disconnect the electrical connector from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch retaining bolt.
4. Remove the park brake warning lamp switch.

1. Install the park brake warning lamp switch to the park brake lever assembly. Align the locator pin to the locator hole.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the park brake switch retaining bolt.

Tighten
Tighten the bolt to 2 N·m (18 lb in).

3. Connect the park brake warning lamp electrical connector to the park brake warning lamp switch.
4. Install the right sound insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side.