Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove either the left front or right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove either the left front or right front fascia extension. Refer to Front Bumper Fascia Extension Replacement - Right Side and Front Bumper Fascia Extension Replacement - Left Side .
4. Disconnect the forward lamp harness from the electrical cover connector.

1

Daytime Running Lamp Bracket Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Daytime Running Lamp Assembly

Tip
Pull rearward in order to remove the lamp assembly from the bracket.