GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure
  1. Turn the ignition OFF.
  2. Disconnect the oil pressure sensor electrical connector.

    3. Object Number: 1210954 Size: SH
  3. Remove the oil pressure sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1210954 Size: SH
  1. Install the oil pressure sensor.

    2. Tighten
    Tighten the oil pressure sensor to 20 N·m (15 lb ft).

  2. Connect the oil pressure sensor electrical connector.