Step | Action | Yes | No |
---|---|---|---|
DEFINITION: Lead/pull is the deviation of the vehicle from a straight path on a level road with no pressure on the steering wheel. | |||
1 | Did you perform the Vehicle Leads/Pull diagnostic table in Suspension General Diagnosis? | Go to Step 2 | Go to Vehicle Leads/Pulls |
2 | Road test the vehicle to verify the concern. Select a smooth level surface to perform the test. Does the condition exist? | Go to Step 3 | System OK |
3 | Cross-switch the front tire and wheel assemblies. Did you complete the procedure? | Go to Step 4 | -- |
4 | Does the vehicle lead/pull in the opposite direction? | Go to Step 5 | |
5 | Replace the tire that is pulling in the opposite direction and then install it to its original position. Refer to Tire Dismounting and Mounting . Did you complete the replacement? | Go to Step 6 | -- |
6 | Verify proper vehicle operation. Does the original condition still exist? | Go to Step 1 | System OK |