GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Body Systems 🢒 Vehicle Access 🢒 Liftgate Latch Striker Replacement

Removal Procedure
  1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .

    2. Object Number: 893609 Size: SH
  2. Use a grease pencil to mark the liftgate latch striker position.
  3. Remove the bolts securing the liftgate latch striker to the vehicle.
  4. Remove the liftgate latch striker and the gasket from the vehicle.

Installation Procedure

    Object Number: 893609 Size: SH
  1. Position the liftgate latch striker and the gasket to the vehicle.
  2. Install the bolts that secure the liftgate latch striker to the vehicle.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Adjust the liftgate latch striker as necessary.

    4. Tighten
    Tighten the latch striker bolts to 25 N·m (20 lb ft).

  4. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .