Removal Procedure
- Remove the lower air deflector. Refer to
Front Air Deflector Replacement.
- Remove the passenger side front wheelhouse liner.
- Drain the washer solvent container.
- Disconnect the washer hose from the rearward washer pump.
- Disconnect the electrical connector from the rearward washer pump.
- Hold the top of the washer pump with one hand and use a flat-bladed tool in order to pry the pump from the washer solvent container.
- Remove the washer pump from the washer solvent container.
- Remove and discard the washer pump grommet.
Installation Procedure
- Install the washer pump grommet into the washer solvent container.
- Lubricate the washer pump intake nozzle with clean water to aid in the installation of the pump into the washer container.
- Install the washer pump nozzle in the washer solvent container by snapping into place.
- Ensure the washer pump is secure to the washer solvent container.
- Connect the electrical connector to the washer pump.
- Connect the washer hose to the washer pump.
- Install the passenger side front wheelhouse liner.
- Install the lower air deflector. Refer to
Front Air Deflector Replacement.
- Open the hood.
- Fill the washer solvent container.
- Close the hood.