Removal Procedure
- Lower the window to the full down position.
- Remove the door trim panel. Refer to
Front Side Door Trim Panel Replacement .
- Starting at one end of the window inner belt sealing strip, pull upward to release the strip.
Installation Procedure
Important: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back
together.
- Work from one end of the sealing strip to the other.
- Position the inner belt sealing strip over the flange on the door inner panel.
Important: Do not distort the sealing strip.
- Press downward to engage the sealing strip the entire length of the door.
- Install the door trim panel. Refer to
Front Side Door Trim Panel Replacement .