GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2008
🢒
SRX
🢒
Body Hardware and Trim
🢒
Interior Trim and Paneling
🢒 Body Side Rear Trim Panel Replacement
Body Side Rear Trim Panel Replacement w/o TB5
Removal Procedure
Lower the rear seats to assist in removal of the trim panel.
Remove the rear quarter trim tie down bezel (1).
Remove the side door garnish molding. Refer to
Side Door Opening Frame Garnish Molding Replacement
.
Remove the body side rear upper garnish molding. Refer to
Body Side Rear Upper Garnish Molding Replacement
.
Remove the rear compartment sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Pull the trim panel (1) away from the body.
Disconnect the electrical connectors from the trim panel.
Remove the trim panel from the vehicle.
Installation Procedure
Position the trim panel (1) to the vehicle.
Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
Connect the electrical connectors.
Index the locating tabs on the trim panel to the holes in the body.
Seat the clips the retain the trim panel to the body.
Install the rear compartment sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Install the body side rear upper garnish molding. Refer to
Body Side Rear Upper Garnish Molding Replacement
.
Install the side door garnish molding. Refer to
Side Door Opening Frame Garnish Molding Replacement
.
Install the rear quarter trim tie down bezel (1).
Put the rear seats in the upright position.
Body Side Rear Trim Panel Replacement w/TB5
Removal Procedure
Lower the rear seats to assist in removal of the trim panel.
Remove the rear quarter trim tie down bezel (1).
Remove the side door garnish molding. Refer to
Side Door Opening Frame Garnish Molding Replacement
.
Remove the body side rear upper garnish molding. Refer to
Body Side Rear Upper Garnish Molding Replacement
.
Remove the rear compartment sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Remove the rear quarter trim cover from the trim panel by pulling away to disengage the retainers.
Pull the trim panel (1) away from the body.
Disconnect the electrical connectors from the trim panel.
Remove the trim panel from the vehicle.
Installation Procedure
Position the trim panel (1) to the vehicle.
Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
Connect the electrical connectors.
Index the locating tabs on the trim panel to the holes in the body.
Seat the clips that retain the trim panel to the body.
Install the rear quarter trim cover to the rear quarter trim panel and push in to secure the retainers.
Install the rear compartment sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Install the body side rear upper garnish molding. Refer to
Body Side Rear Upper Garnish Molding Replacement
.
Install the side door garnish molding. Refer to
Side Door Opening Frame Garnish Molding Replacement
.
Install the rear quarter trim tie down bezel (1).
Put the rear seats in the upright position.