GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Side Door Upper Hinge and Lower Hinge Replacement

Removal Procedure

    Object Number: 738141 Size: SH

    Important: Replace only one hinge at a time then repeat procedure for the second hinge, if needed.

  1. Remove the push-in fasteners securing the fender sound insulator to the front fender.
  2. Remove the fender sound insulator.

    3. Object Number: 787975 Size: SH
  3. Mark the position of the hinge on the body.
  4. Support the door.
  5. Remove the hinge bolts (1) from the body.
  6. Remove the hinge bolts from the door.

Installation Procedure

    Object Number: 787975 Size: SH
  1. Align the hinge to the marks made on the body during removal.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the hinge to body bolts (1).

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the hinge to door bolts.

    4. Tighten
    Tighten the hinge to door bolts to 25 N·m (18 lb ft).

  4. Remove the door support.

    5. Object Number: 738141 Size: SH
  5. Install the fender sound insulator.

    6. Notice: Striker alignment is a crucial part of door latch operation. Do not use the door striker to adjust the door to the vehicle. Failure to properly adjust the striker can result in damage to the door latch and the striker.

  6. Adjust the door. Refer to Door Adjustment .
  7. Touch up any paint damage to the hinge and the bolts with body color paint.