GM Service Manual Online
For 1990-2009 cars only

    Object Number: 743350  Size: SH
  1. Loosen the fasteners (2) that secure the hood to the hood hinges (1).
  2. Adjust the hood in order to obtain an even gap on both sides between the hood and the fenders and so that the hood is flush with both fenders on the front edge.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the fasteners (2) in order to secure the hood to the hood hinges (1).
  5. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).