Preliminary Procedures

1. Remove the headlamps. Refer to Headlamp Replacement .
2. Remove the front air deflector. Refer to Front Air Deflector Replacement .
3. Remove the front bumper fascia extensions. Refer to Front Bumper Fascia Extension Replacement - Right Side and Front Bumper Fascia Extension Replacement - Left Side .

1

Front Bumper Fascia Reinforcement Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Front Bumper Fascia Reinforcement Nut (Qty: 2)

Tip
It is only necessary to loosen the nuts to slide the bumpers from the fenders. Do not remove them entirely.

Tighten
9 N·m (80 lb in)

3

Front Bumper Fascia Plastic Retainer (Qty: 6)

4

Front Bumper Fascia

Procedure

1. Disconnect all electrical connectors and any attached harnesses before attempting to remove.
2. Transfer any parts as needed after the fascia has been removed.