GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right rear trim panel. Refer to Body Side Rear Upper Garnish Molding Replacement .
  2. Disconnect the electronic suspension control module electrical connectors.

  3. Object Number: 1371676  Size: SH
  4. Remove the electronic suspension control module from the bay board.

Installation Procedure


    Object Number: 1371676  Size: SH
  1. Install the electronic suspension control module to the bay board.
  2. Connect the electronic suspension control module electrical connectors.
  3. Install the right rear trim panel. Refer to Body Side Rear Upper Garnish Molding Replacement .