Removal Procedure
- Remove the rear vent window. Refer to
Sunroof Window Replacement
.
- Place the rear vent window upside down on a clean protected surface.
- Remove the hinge plate screws (2).
- Remove the hinge plates (1) from the window frame (3).
Installation Procedure
- Position the hinge plates (2) to the frame on the rear vent window.
- Loosely install the hingeplate screws (1).
Notice: Refer to Fastener Notice in the Preface section.
- Move the hinge plates fully forward.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Install the rear vent window. Refer to
Sunroof Window Replacement
.