GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Number 1 Back Replacement - Right Side

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the right seat cushion. Refer to Rear Seat Cushion Replacement - Right Side .

    3. Object Number: 1273944 Size: SH
  3. Remove the pivot trim cover screws (1).
  4. Remove the outer pivot covers.

    5. Object Number: 1273942 Size: SH
  5. Disconnect the seat release cables (2) from the seat adjuster.

    6. Object Number: 1273938 Size: SH
  6. Disconnect the J-channel retainers (1).
  7. Remove the seat back retaining bolts (2).

    8. Object Number: 1273927 Size: SH
  8. Remove the seat back retaining bolt (1).
  9. Remove the seat back from the seat adjuster.

Installation Procedure
  1. Install the seat back on to the seat adjuster.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1273938 Size: SH
  2. Install the seat back retaining bolts (2).

    3. Tighten
    Tighten the bolts to 35 N·m (26 lb ft).


    Object Number: 1273927 Size: SH
  3. Install the seat back retaining bolt (1).

    4. Tighten
    Tighten the bolt to 35 N·m (26 lb ft).


    Object Number: 1273942 Size: SH
  4. Connect the seat release cables (2) to the seat adjuster.

    5. Object Number: 1273938 Size: SH
  5. Connect the J-channel retainers (1).

    6. Object Number: 1273944 Size: SH
  6. Install the pivot cover screws (1).

    7. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  7. Install the seat cushion. Refer to Rear Seat Cushion Replacement - Right Side .
  8. Install the seat into the vehicle. Refer to Rear Seat Replacement .