Front Seat Heater Control Module Replacement for Cadillac SRX 2008

Caution: Refer to SIR Caution in the Preface section.




1. Remove the front seat cushion. Refer to Front Seat Cushion Replacement .
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the heated seat control module and install the retaining screws (2).

Tighten
Tighten the screws to 2 N·m (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion. Refer to Front Seat Cushion Replacement .