GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 HVAC 🢒 Heating, Ventilation, and Air Conditioning 🢒 Power Steering Fluid Cooler Replacement

Power Steering Fluid Cooler Replacement With V92

Removal Procedure
  1. Remove the radiator upper grille. Refer to Radiator Upper Grille Replacement .
  2. Remove the front air deflector, if necessary. Refer to Front Air Deflector Replacement .
  3. Place drain pans under the vehicle as needed.

    4. Object Number: 1371688 Size: SH
  4. Disconnect the power steering cooler inlet/outlet hose assembly from the power steering fluid cooler.

    5. Object Number: 1371685 Size: SH
  5. Remove the power steering fluid cooler bolts.
  6. Remove the power steering fluid cooler from the vehicle.

Installation Procedure
  1. Install the power steering fluid cooler to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1371685 Size: SH
  2. Install the power steering fluid cooler bolts.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 1371688 Size: SH
  3. Connect the power steering cooler inlet/outlet hose assembly to the power steering fluid cooler.
  4. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  5. Install the radiator upper grille. Refer to Radiator Upper Grille Replacement .
  6. Install the front air deflector, if necessary. Refer to Front Air Deflector Replacement .
  7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

Power Steering Fluid Cooler Replacement Without V92

Removal Procedure
  1. Remove the front air deflector. Refer to Front Air Deflector Replacement .
  2. Place drain pans under the vehicle as needed.

    3. Object Number: 874626 Size: SH
  3. Disconnect the power steering gear outlet hose and the power steering cooler outlet hose from the power steering fluid cooler.

    4. Object Number: 908531 Size: SH
  4. Remove the power steering fluid cooler bolts.
  5. Remove the power steering fluid cooler from the vehicle.

Installation Procedure
  1. Install the power steering fluid cooler to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 908531 Size: SH
  2. Install the power steering fluid cooler bolts.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 874626 Size: SH
  3. Connect the power steering gear outlet hose and the power steering cooler outlet hose to the power steering fluid cooler.
  4. Clean any excess power steering fluid from the vehicle and remove the drain pans.
  5. Install the front air deflector. Refer to Front Air Deflector Replacement .
  6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .