EN 46104 Water Pump Pulley Holding Tool
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the water pump bolts to 10 N·m (89 lb in).
Tighten
Tighten the water pump pulley bolts to 12 N·m (106 lb in).
Important: Use a catch basin to collect escaping coolant.
Do not reuse the seal.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the water pump bolts to 10 N·m (89 lb in).
Tighten
Tighten the water pump pulley bolts to 12 N·m (106 lb in).