For 1990-2009 cars only
Removal Procedure
- Remove the front seat back trim cover. Refer to Bucket Seat Replacement .
- Remove the front seat cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
- Remove the screws retaining the roller assembly cover and remove the cover.
- Remove the bolt retaining the seat belt retractor to the seat frame.
- Remove the seat belt lower retaining nut (2).
- Remove the seat belt retractor assembly.
Caution: Refer to SIR Caution in the Preface section.
Installation Procedure
- Ensure that the seat belt is not twisted before installing the retractor.
- Install the seat belt (2) to the mounting stud.
- Install the retaining nut.
- Position the seat belt over the roller assembly.
- Install the seat belt retractor.
- Install the retaining bolt.
- Install the roller assembly cover.
- Install the roller assembly screws.
- Ensure proper operation of the seat belt retractor.
- Install the seat back cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
- Install the front seat. Refer to Bucket Seat Replacement .
- Confirm proper operation of the seat belt retractors.
Ensure that the anti-rotation tab on the seat belt is located properly in the seat frame before tightening the retaining nut.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the nut to 42 N·m (31 lb ft).
Ensure that the seat belt is not twisted.
Ensure that the anti-rotation tab on the seat belt retractor is located properly on the seat frame before tightening the retractor fastener.
Tighten
Tighten the bolt to 26 N·m (19 lb ft).
Tighten
Tighten the fasteners to 5 N·m (44 lb in).
