GM Service Manual Online
For 1990-2009 cars only

Front Floor Console Replacement Left Hand Drive


Object Number: 1821343  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .

1

Console Bolt Cover (Qty: 2)

Tip
Use a flat-bladed plastic trim tool to remove the covers.

2

Console Rear Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Move the front seats to the full forward position to access the rear bolts.

Tighten
9 N·m (80 lb in)

3

Console Front Bolt (Qty: 2)

Procedure

  1. Move the front seats to the full rearward position to access the front bolts.
  2. Pull the carpet away from the console to access the front console bolts.

Tighten
9 N·m (80 lb in)

4

Console Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

5

Console Assembly

Procedures

  1. Disconnect the electrical connections.
  2. With the add of an assistant remove the console from the vehicle.
  3. When replacing the console assembly, transfer all necessary components.

Front Floor Console Replacement Right Hand Drive


Object Number: 1834869  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .

1

Console Bolt Cover (Qty: 2)

Tip
Use a flat-bladed plastic trim tool to remove the covers.

2

Console Rear Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Move the front seats to the full forward position to access the rear bolts.

Tighten
9 N·m (80 lb in)

3

Console Front Bolt (Qty: 2)

Tighten
9 N·m (80 lb in)

Procedures

  1. Move the front seats to the full rearward position to access the front bolts.
  2. Pull the carpet away from the console to access the front console bolts.

4

Console Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

5

Console Assembly

Procedures

  1. Disconnect the electrical connections.
  2. With the add of an assistant remove the console from the vehicle.
  3. When replacing the console assembly, transfer all necessary components.