Removal Procedure
- Remove the knee bolster. Refer to
Knee Bolster Replacement.
- Remove the park brake release handle mounting screws.
- Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
- Remove the park brake release handle (2) from the park brake release cable (1).
- Remove the park brake release handle from the vehicle.
Installation Procedure
- Install the park brake release handle (2) to the park brake release cable (1).
- Install the park brake release cable housing (3) to the park brake release handle assembly (1).
- Install the park brake release handle assembly (1) to the knee bolster.
Notice: Refer to Fastener Notice in the Preface section.
- Install the park brake release handle mounting screws.
Tighten
Tighten the park brake release handle mounting screws to 2 N·m (18 lb in).
- Install the knee bolster. Refer to
Knee Bolster Replacement.