GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 General Information 🢒 General Information 🢒 Parking Brake Release Cable Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement.

    2. Object Number: 786887 Size: SH
  2. Remove the park brake release handle mounting screws.
  3. Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
  4. Remove the park brake release cable (2) from the park brake release handle assembly (1).

    5. Object Number: 754106 Size: SH
  5. Remove the park brake release cable housing (2) from the park brake pedal assembly (1).

    6. Object Number: 754103 Size: SH
  6. Remove the park brake cable (1) from the park brake pedal release lever (2).
  7. Remove the park brake release cable from the vehicle.

Installation Procedure

    Object Number: 754103 Size: SH
  1. Install the park brake cable (1) to the park brake pedal release lever (2).

    2. Object Number: 754106 Size: SH
  2. Install the park brake release cable housing (2) to the park brake pedal assembly (1).

    3. Object Number: 786887 Size: SH
  3. Install the park brake release cable (2) to the park brake release handle assembly (1).
  4. Install the park brake release cable housing (3) to the park brake release handle assembly (1).
  5. Install the park brake release handle assembly (1) to the knee bolster.

    6. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the park brake release handle mounting screws.

    7. Tighten
    Tighten the park brake release handle mounting screws to 2 N·m (18 lb in).

  7. Install the knee bolster. Refer to Knee Bolster Replacement.