Transmission Control Lever Knob Replacement. Cadillac SRX 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 General Information 🢒 General Information 🢒 Transmission Control Lever Knob Replacement

Callout

Component Name

Shift Control Knob Bezel

Tip

•	Remove the bezel by carefully inserting a small flat-bladed tool between the bezel (1) and the shift knob (3). Apply careful downward pressure to the bezel to separate the bezel from the shift knob.

•	Install the bezel by lifting the bezel (1) up to the shift knob (3) until a click sound is heard indicating the bezel is secured to the shift knob.

Shift Control Knob Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
Loosen the shift control knob screw approximately 3-4 turns. It is not necessary to fully remove the screw from the shift control knob.

Tighten
2 N·m (18 lb in)

Shift Control Knob