For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC B0058 00: Passenger Pretensioner SuppressedCircuit/System Description
The inflatable restraint sensing and diagnostic module (SDM) will set DTC B0058 00 when a pretensioner deployment has been commanded but the passenger seat belt pretensioner is suppressed. The seat belt pretensioner can be suppressed at the request of the passenger presence system.
Conditions for Running the DTC
This DTC is set when a pretensioner deployment has been commanded and the passenger seat belt pretensioner has been suppressed.
Action Taken When the DTC Sets
| • | The SDM sets a DTC B0058. |
| • | The SDM requests the instrument panel cluster (IPC) to illuminate the AIR BAG indicator. |
| • | DTC B0052, B0053, or B0055 will set along with this DTC. |
Reference Information
Schematic Reference
Connector End View Reference
Description and Operation
SIR System Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Testing
- Verify DTC B0052, B0053, or B0055 are not set.
- Verify DTC B0058 is not set.
| ⇒ | If DTC is set, refer to the Diagnostic Trouble Code (DTC) List - Vehicle. |
| ⇒ | If DTC B0058 is set, replace the SDM. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
| • | Control Module References for SDM replacement, setup, and programming |
