Removal Procedure
Warning: Allow sufficient time for the engine to cool before removing the ECT sensor. A hot engine may cause an excessive coolant loss or a personal injury.
- Turn the ignition OFF.
- Remove the coolant temperature sensor electrical connector.
- Remove the coolant temperature sensor.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the coolant temperature sensor.
Tighten
Tighten the coolant temperature sensor to 22 N·m (16 lb ft).
- Install the coolant temperature sensor electrical connector.
- Inspect and fill the cooling system as necessary. Refer to
Cooling System Draining and Filling.