GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2009
🢒
SRX
🢒
Engine
🢒
Engine Cooling
🢒 Drive Belt Tensioner Replacement - Air Conditioning, Power Steering, and Water Pump
Removal Procedure
Remove the air conditioning, power steering and water pump drive belt. Refer to
Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement
.
Loosen the drive belt tensioner bolt.
Remove the drive belt tensioner and bolt from the engine.
Installation Procedure
Position the drive belt tensioner and bolt to the engine as an assembly.
Ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the drive belt tensioner bolt and tighten to
50 N·m (37 lb ft)
.
Install the air conditioning, power steering and water pump drive belt. Refer to
Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement
.