Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Note: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
- Remove the stabilizer shaft link upper retaining nut.
- Remove the stabilizer shaft link lower retaining nut.
- Remove the stabilizer shaft link from the vehicle.
Installation Procedure
- Install the stabilizer shaft link to the vehicle.
Note: Do not tighten the nuts at this time.
Note: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
- Install the stabilizer shaft link lower retaining nut.
Caution: Refer to Fastener Caution in the Preface section.
- Install the stabilizer shaft link upper retaining nut and tighten to
115 N·m (95 lb ft).
- Lower the vehicle.