GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Engine 🢒 Engine Electrical 🢒 Headlamp Leveling Front Suspension Height Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

    3. Object Number: 802719 Size: SH
  3. Disconnect the electrical connector (1).

    4. Object Number: 802716 Size: SH
  4. Disconnect the ball and socket (1) from vehicle.
  5. Remove the bolt (2) from the sensor.
  6. Remove the sensor from the vehicle.

Installation Procedure

    Object Number: 802719 Size: SH
  1. Position the sensor (1) to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 802716 Size: SH
  2. Install the bolt (2) to secure the sensor to the vehicle.

    3. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  3. Install ball and socket (1) to sensor.

    4. Object Number: 802719 Size: SH
  4. Connect the electrical connector (1) to the sensor.
  5. Install the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  6. Lower the vehicle.