GM Service Manual Online
For 1990-2009 cars only

Engine Mount Bracket Replacement - Right Side with AWD

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side.
  3. Install a screw jack with a block of wood under the oil pan for support.

  4. Object Number: 888294  Size: SH
  5. Remove the right engine mount upper retaining nut.

  6. Object Number: 888300  Size: SH

    Note: Ensure not to distort or bend the engine mount heat shield.

  7. Remove the right engine mount bracket mounting bolts.
  8. Remove the engine mount bracket from the vehicle.

Installation Procedure


    Object Number: 888300  Size: SH
  1. Install the engine mount bracket to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the engine mount bracket mounting bolts and tighten to 60 N·m (44 lb ft).
  4. Remove the screw jack.

  5. Object Number: 888294  Size: SH
  6. Install the upper engine mount retaining nut and tighten to 80 N·m (59 lb ft).
  7. Install the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side.
  8. Lower the vehicle.

Engine Mount Bracket Replacement - Right Side RWD

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side.
  3. Install a screw jack with a block of wood under the oil pan for support.

  4. Object Number: 888289  Size: SH
  5. Remove the right engine mount upper retaining nut.

  6. Object Number: 888292  Size: SH

    Note: Ensure not to distort or bend the engine mount heat shield.

  7. Remove the right engine mount bracket mounting bolts.
  8. Remove the engine mount bracket from the vehicle.

Installation Procedure


    Object Number: 888292  Size: SH
  1. Install the engine mount bracket to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the engine mount bracket mounting bolts and tighten to 60 N·m (44 lb ft).
  4. Remove the screw jack.

  5. Object Number: 888289  Size: SH
  6. Install the upper engine mount retaining nut and tighten to 80 N·m (59 lb ft).
  7. Install the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side.
  8. Lower the vehicle.